Filling machines are playing a bigger role in our lives, so many companies need to buy filling machines to help them achieve production. Filling machine manufacturers tell you the use of filling machine, we must pay attention to the problem:
1. Filling machine manufacturers to tell you before filling the filling machine, first install and then debug, in the debugging before carefully read the instructions, ready to use the tools. After filling the filling machine, the filling track, then the bottle into the level, the tank filled with material, all electrical switches in the closed position. Will be filling the container into the tooling box, connected to an external power supply, the power outlet must be a three-pin socket, and a reliable grounding wire to prevent the case of electric shock, the machine power switch to ON, power indicator light. With the support frame to support the filling frame to withstand, with your fingers up the top of the filling head on the positioning sleeve, positioning sleeve should be able to move up and down, where the filling needle exposed or retracted into the unimpeded.
The switch below the barrel to the open position, so that the material can flow into the total metering pump, according to the total volume of each container filling, adjust the crank on the screw, the filling speed control plate knob to spin about 20 degrees , And then set the switch on the speed control board to open the position. When each filling head flows out of the liquid for the set amount, the liquid volume will be tightened to tighten the nut, cover the filling head shell, and release the filling frame support plate.
2. Filling machine manufacturers to tell you after the use of filling machine should pay attention to its maintenance, in the maintenance of cleaning the piston and when the same time to remove the fixed screws, so as not to affect the first time in the demolition of another process Claim. Before cleaning the piston filling machine, the remaining product should be cleaned, and then filled with soft detergent in the bucket. The cylinder has been lubricated at the factory. Please do not open or add any lubricating oil to ensure that the filling machine surface is clean and hygienic. In addition, while maintaining and correct the use of filling machine at the same time, but also regular testing, debugging. Only this kind of filling machine can be healthy and stable work.